Grizzly G0692, Owner'S Manual, Page: 16 / 36

-14-
Model G0692 (Mfg. 11/08 and Later)
vise Quick Release Chip Collection Tray
the Model g0692 is equipped with a quick release
on the vise leadscrew. this allows for rapid adjust-
ments for a variety of workpiece dimensions.
To use the vise quick release:
1. Move the vise quick release lever to the left
("loose") position. this releases the leadscrew
and allows the vise clamp to slide as needed
(
figure 10).
the Model g0692 has a chip collection tray to
catch most of the chips produced during cutting.
periodically slide it out the back and dispose of
the chips (
figure 11).
figure 10.
Vise quick release lever.
2. slide the vise clamp to the approximate
location needed, then move the vise quick
release lever to the right ("tight") position.
this engages the leadscrew.
3. use the vise handle to tighten and loosen
the vise clamp as needed to secure the
workpiece.
vise Quick
release lever
leadscrew
vise handle
figure 11.
Chip collection tray.
Chip tray
to prevent unauthorized use of the saw, it can
be locked in the off position by placing a padlock
through the hole in the trigger switch (
figure
12).
Switch Lock-out
figure 12.
Switch lockout.
padlock
(not included)
trigger switch