Grizzly G0692, Owner'S Manual, Page: 13 / 36

Model G0692 (Mfg. 11/08 and Later)
-11-
Workbench Load
refer to the
Machine Data Sheet for the weight
and footprint specifications of your machine.
some workbenches may require additional rein-
forcement to support both the machine and
workpiece.
placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. see
figure 4 for the minimum
working clearances.
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
Site Considerations
figure 4. Minimum working clearances.
14"
Test Run
once the assembly is complete, test run your
machine to make sure it runs properly.
if, during the test run, you cannot easily locate
the source of an unusual noise or vibration, stop
using the machine immediately, then review the
Troubleshooting on page 23.
if you still cannot remedy a problem, contact our
tech support at (570) 546-9663 for assistance.
To test run the machine:
1. Make sure you have read the safety instruc-
tions at the beginning of the manual and that
the machine is set up properly.
2. Make sure all tools and objects used during
setup are cleared away from the machine.
3. Connect the machine to the power source.
4. pull the trigger switch to turn the saw on.
5. listen and watch for abnormal noises or
actions. the machine should run smoothly
with little or no vibration or rubbing noises.
— strange or unusual noises must be inves-
tigated and corrected before operating the
machine further. always disconnect the
machine from power when investigating or
correcting problems.
6. release the trigger switch to turn the machine
off.
13"
blade installation
to install the blade on your new machine, perform
the procedures for
Changing blade on page 17,
omitting the removal of the old blade, then return
to
Test Run, below.