Grizzly G0692, Owner'S Manual, Page: 20 / 36

-18-
Model G0692 (Mfg. 11/08 and Later)
3. retract the blade guard. as it rotates, the
mounting bracket should also rotate, expos-
ing the arbor screw, as shown in
figure 19
.
figure 19.
Blade guard retracted.
blade guard
arbor screw
Mounting bracket
4. lightly press down on the arbor lock button
and rotate the blade until the button moves
inward and locks the arbor. While holding the
button, loosen the arbor screw (
figure 20).
figure 20.
Arbor screw removal.
5. remove the arbor screw, arbor washer, arbor
flange, and the old blade ( figure 21).
figure 21.
Blade components.
arbor screw
arbor Washer
arbor Flange
blade
6. install the new blade, arbor flange, arbor
washer, and arbor screw in the reverse order
from which they were removed. use the arbor
lock button to secure the arbor while tighten-
ing the arbor screw (
figure 22).
note: When installing the new blade, make
sure the teeth point downward at the front of
the blade, as shown in
figures 13 & 22
Blade
Arbor
Flange
Arbor
Washer
Cap
Screw
figure 22.
Blade installation sequence.
7. return the blade guard to its normal position
and tighten both phillips head screws shown
in
figure 18.
arbor lock button
arbor screw