Model g0661/g0713 (Mfg. since 1/10)
-31-
SECTION 4: OpERATIONS
Basic Controls
ON/OFF Switch: starts and stops the motor.
Switch Disabling Lock: When installed, disables
the switch to prevent accidental startup.
Damage to your eyes, lungs, and hearing
could result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
For your Own Safety Read Instruction
Manual Before Operating Saw
a) Wear eye protection.
b) use saw-blade guard and riving knife for
every operation for which it can be used,
including all through sawing.
c) Keep hands out of the line of saw blade.
d) use a push-stick when required.
e) pay particular attention to instructions
on reducing risk of kickback.
f) Do not perform any operation freehand.
g) Never reach around or over saw blade.
NOTICE
If you have never used this type of machine
or equipment before, seek training from an
experienced machine operator or read "how
to" books before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Blade height handwheel: adjusts blade height.
Blade height Lock: locks the blade height.
Blade Tilt handwheel: adjusts the blade angle
from 0°–45°.
Blade Tilt Lock: locks the blade tilt setting so it
does not move during operations.
Fence Lock: locks fence when pushed down,
unlocks fence when pulled up.
Figure 35. Basic table saw controls.
Blade tilt
handwheel
Blade tilt
lock
Fence
lock
Blade height
handwheel
Blade height
lock
Figure 34. on/oFF switch with disabling lock.
H]V[i
EVYadX`
DC
$
HI6GI
7jiidc
D;;
$
HIDE
EVYYaZ
