-14-
g0648 Welding Fume Extractor
Floor Load
refer to the
Machine Data Sheet
for the weight
and footprint specifications of your machine.
Some floors may require additional reinforcement
to support both the machine and operator.
placement Location
this machine is designed to operate when the
ambient temperature is between 41°F and 122°F,
and when the humidity is between 30% and 95%.
however, if the machine is only to be used in
cycles that are less than 24-hours and is allowed
to cool between the runs, the maximum ambient
temperature range for operation can be is 133°F.
Consider existing and anticipated needs, size
of material to be welded, and space for auxil-
iary stands, work tables or other machinery when
establishing a location for your new machine. See
Figure 5
for the minimum working clearances.
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
Site Considerations
Figure 5.
Connection types and minimum
working clearances.
220V
3-PHASE
DUCTING
WORK ZONE
RADIUS
RECYCLED
AIR
s.%
BASIC
WELDING
BENCH
OPTIONAL
G0650 WELDING
DOWNDRAFT
TABLE
LOWER
SUCTION
CONNECTION
ONLY
OVERHEAD
SUCTION
CONNECTION
ONLY
24" MINIMUM
OUTPUT
CLEARANCE
L6AA
DUAL SUCTION CONNECTION
OPTIONAL
G0650 WELDING
DOWNDRAFT
TABLE
refer to
ACCESSORIES
on
page 23
for optional g0650 Welding downdraft
table.
