-12-
g0648 Welding Fume Extractor
Inventory
the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note:
If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Crate 1:
(
Figure 3
)
Qty
A.
Welding Fume Extractor unit ..................... 1
b.
Button head Cap Screws
3
/
8
"-16 x 1"
(ducting arm) ............................................. 6
C.
Flat Washer
3
/
8
" (ducting arm) ................... 6
D.
roller Filter paper (pre-installed roll) ........ 1
E.
door levers ................................................ 2
F.
downdraft table adapter Box .................... 1
G.
Bolt Bag ...................................................... 1
—hex Bolts
3
/
8
"-16 x
3
/
4
" (adapter Box) ...... 6
—Flat Washers
3
/
8
" (adapter Box) .............. 6
box 2:
(
Figure 4
)
Qty
h.
ducting arm and Shroud assembly ........... 1
SUFFOCATION hAzARD!
Immediately discard all plastic
bags and packing materials to
eliminate choking/suffocation
hazards for children and
animals.
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 4.
ducting arm assembly.
h
Figure 3.
Welding fume extractor unit.
B C
F
g
d
E
a
