-36-
g0648 Welding Fume Extractor
these pages are current at the time of printing. however, in the spirit of improvement, we may make changes
to the electrical systems of future machines. Study this diagram carefully. if you notice differences between
your machine and these wiring diagrams, call technical Support at (570) 546-9663 for assistance.
SECTION 8: WIRING
Electrical Safety Instructions
1.
ShOCK hAzARD.
disconnect the power
from the machine before servicing electri-
cal components. touching electrified parts
will result in personal injury including but
not limited to severe burns, electrocution, or
death.
2. CIRCUIT REQUIREMENTS.
you MuSt fol-
low the
CIRCUIT REQUIREMENTS
section
on
page 10
.
If you are unsure about the
wiring codes in your area or you plan to
connect your machine to a shared cir-
cuit, consult a qualified electrician.
3.
GROUNDED CIRCUIT.
Electrocution or fire
could result if the machine is not grounded
and installed in compliance with electrical
codes. Compliance MuSt be verified by a
qualified electrician.
4. MOTOR WIRING.
the motor wiring shown
in these diagrams are current at the time of
printing, but it may not match your machine.
always use the wiring diagram inside the
motor junction box.
5. EXpERIENCING DIFFICULTIES.
if at any
time you are experiencing difficulties under-
standing the information included in this
section, contact our technical Support at
(570) 546-9663.
NOTICE
The photos and diagrams included in this
section are best viewed in color. you can view
these pages in color at
www.grizzly.com.
WARNING!
SHOCK HAZARD!
Disconnect power
before working on
wiring.
NOTICE
This machine uses sensitive electronics that
rely on stable current on all power supply
legs. We do not recommend connecting this
machine to a phase converter. Ignoring this
notice may void warranty.
