Grizzly G0510ZW, Owner'S Manual

Page: 51 / 56

Model G0510ZW (Mfd. Since 9/16)
-49-
Specifications
MODEL G0510ZW
3 ⁄
4
HP SHAPER
WARNING!
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Full-Load Amp Draw: 14A
Motor Speed: 3450 RPM
Spindle Speed: 11,000 RPM
Spindle Size: 1/2"
Spindle Travel: 7/8"
Maximum Cutter Diameter: 2-7/8"
Maximum Cutter Height: 1-9/16"
Table Size: 17-7/8" X 15-1/2"
Floor-to-Table Height: 34-1/4"
Weight: 154 lbs.
Manufactured for Grizzly in China
Date
S/N
G0510ZW Machine Labels
(02/05/16)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
162 x 105mm
51 x 84mm 51 x 84mm
36 x 32mm
51 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
27 x 237mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
5. Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Labels marked *** have changed since last sending.
***
Specifications
MODEL G0510ZW
1 HP SHAPER
WARNING!
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Full-Load Amp Draw: 14A
Motor Speed: 3450 RPM
Spindle Speed: 11,000 RPM
Spindle Size: 1/2"
Spindle Travel: 7/8"
Maximum Cutter Diameter: 2-7/8"
Maximum Cutter Height: 2-1/2"
Table Size: 17-7/8" X 15-1/2"
Floor-to-Table Height: 34-1/4"
Weight: 154 lbs.
Mfd. for Grizzly in China
Date
S/N
G0510ZW Machine Labels
(09/02/16)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
162 x 105mm
51 x 84mm 51 x 84mm
36 x 32mm
51 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
27 x 237mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
5. Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Labels marked *** have changed since last sending.
***
Specifications
MODEL
G0510ZW
3 ⁄
4 HP SHAPER
WARNING!
Motor: 1 HP
, 1
10V
, Single-Phase, 60 Hz
Full-Load
Amp Draw: 14A
Motor Speed: 3450 RPM Spindle Speed: 1
1,000 RPM
Spindle Size: 1/2" Spindle T
ravel: 7/8"
Maximum Cutter Diameter: 2-7/8" Maximum Cutter Height: 1-9/16" Table Size: 17-7/8" X 15-1/2" Floor-to-T
able Height: 34-1/4"
W
eight: 154 lbs.
Manufactured for Grizzly in China
Date S/N
G0510ZW Machine Labels
(02/05/16)
• 1:1 Sizing (Labels are actual size) • Labels must be made of oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at
manuals@grizzly.com
.
162 x 105mm
51 x 84mm
51 x 84mm
36 x 32mm
51 x 84mm
To reduce risk of death or serious injury, read manual BEFORE using machine. To get a new manual, call (800) 523-4777 or go to www.grizzly.com
.
INJUR
Y/SHOCK
HAZARD!
Disconnect power before adjustments, maintenance, or service.
27 x 237mm
W
ARNING!
EYE/EAR/LUNG
INJUR
Y HAZARD!
Always wear safety glasses, ear protection, and respirator when using this machine.
To reduce risk of serious injury when using this machine:
1.
Read and understand owner’s manual before operating. 2.
Always wear approved eye protection and respirator. 3.
Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4.
Disconnect power before changing cutters or adjusting/servicing
shaper.
5.
Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6.
Always use overhead guard or a guarding fixture when free-hand
shaping or when adjustable fence is not in place.
7.
Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a safe distance.
8.
Always feed workpiece against rotation of cutter. 9.
Do not use awkward hand positions while feeding workpiece.
10.
Reduce risk of kickback by taking multiple passes when removing a large amount of material.
11.
Never operate shaper while intoxicated, distracted, or tired.
12.
Do not expose machine to rain or dampness.
13.
Prevent unauthorized use by children or untrained users; restrict access or disable machine when unattended.
Labels marked *** have changed since last sending.
***
Specifications
MODEL G0510ZW
3 ⁄
4
HP SHAPER
WARNING!
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Full-Load Amp Draw: 14A
Motor Speed: 3450 RPM
Spindle Speed: 11,000 RPM
Spindle Size: 1/2"
Spindle Travel: 7/8"
Maximum Cutter Diameter: 2-7/8"
Maximum Cutter Height: 1-9/16"
Table Size: 17-7/8" X 15-1/2"
Floor-to-Table Height: 34-1/4"
Weight: 154 lbs.
Manufactured for Grizzly in China
Date
S/N
G0510ZW Machine Labels
(02/05/16)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
162 x 105mm
51 x 84mm 51 x 84mm
36 x 32mm
51 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
27 x 237mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
5. Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Labels marked *** have changed since last sending.
***
Specifications
MODEL G0510ZW
3 ⁄
4
HP SHAPER
WARNING!
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Full-Load Amp Draw: 14A
Motor Speed: 3450 RPM
Spindle Speed: 11,000 RPM
Spindle Size: 1/2"
Spindle Travel: 7/8"
Maximum Cutter Diameter: 2-7/8"
Maximum Cutter Height: 1-9/16"
Table Size: 17-7/8" X 15-1/2"
Floor-to-Table Height: 34-1/4"
Weight: 154 lbs.
Manufactured for Grizzly in China
Date
S/N
G0510ZW Machine Labels
(02/05/16)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
162 x 105mm
51 x 84mm 51 x 84mm
36 x 32mm
51 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
27 x 237mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
5. Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Labels marked *** have changed since last sending.
***
Specifications
MODEL G0510ZW
3 ⁄
4
HP SHAPER
WARNING!
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Full-Load Amp Draw: 14A
Motor Speed: 3450 RPM
Spindle Speed: 11,000 RPM
Spindle Size: 1/2"
Spindle Travel: 7/8"
Maximum Cutter Diameter: 2-7/8"
Maximum Cutter Height: 1-9/16"
Table Size: 17-7/8" X 15-1/2"
Floor-to-Table Height: 34-1/4"
Weight: 154 lbs.
Manufactured for Grizzly in China
Date
S/N
G0510ZW Machine Labels
(02/05/16)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
162 x 105mm
51 x 84mm 51 x 84mm
36 x 32mm
51 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
27 x 237mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
5. Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Labels marked *** have changed since last sending.
***
Labels & Cosmetics
200
201
202
204V2
203
205
202
Specifications
MODEL G0510ZW
3 ⁄
4
HP SHAPER
WARNING!
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Full-Load Amp Draw: 14A
Motor Speed: 3450 RPM
Spindle Speed: 11,000 RPM
Spindle Size: 1/2"
Spindle Travel: 7/8"
Maximum Cutter Diameter: 2-7/8"
Maximum Cutter Height: 1-9/16"
Table Size: 17-7/8" X 15-1/2"
Floor-to-Table Height: 34-1/4"
Weight: 154 lbs.
Manufactured for Grizzly in China
Date
S/N
G0510ZW Machine Labels
(02/05/16)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
162 x 105mm
51 x 84mm 51 x 84mm
36 x 32mm
51 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
27 x 237mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
5. Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Labels marked *** have changed since last sending.
***
206
REF PART # DESCRIPTION REF PART # DESCRIPTION
200 P0510ZW200 EYE/EAR/LUNG LABEL 204V2 P0510ZW204V2 MACHINE ID LABEL V2.09.16
201 P0510ZW201 READ MANUAL LABEL 205 P0510ZW205 GRIZZLY GREEN TOUCH-UP PAINT
202 P0510ZW202 ELECTRICITY LABEL 206 P0510ZW206 GRIZZLY.COM LABEL
203 P0510ZW203 DISCONNECT 110V LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.