-24-
Model G0510ZW (Mfd. Since 9/16)
Adjusting Spindle
Height
To adjust cutter height:
1. Loosen spindle elevation lock shown in
Figure 21.
Figure 21. Spindle elevation lock knob.
Spindle
Elevation
Lock
2. Move spindle up or down with elevation
adjustment lever, shown in
Figure 22, until
desired spindle height is obtained.
Fence Adjustments
Each side of the fence is independently adjust-
able to compensate for different cutting thickness-
es and special shaping applications. One turn of
the fence offset knob (see
Figure 23) moves the
split fence approximately
3
/
64
" (.040").
When removing material from the whole face
of your workpiece, the outfeed fence should be
adjusted to the proper offset to provide support for
the workpiece as it passes over the cutter.
To adjust fence for straight shaping:
1. Loosen fence lock lever (see Figure 23).
2. Adjust infeed fence so cutter will remove
desired amount of stock.
Note:
To help determine the best setting,
select wood for a test piece that most closely
resembles your actual workpiece.
3. Lock infeed fence with fence lock lever.
Figure 23. Example of fence adjustments.
Fence Offset
Knob
Fence Offset
Lock Lever
The spindle height is adjustable to allow for preci-
sion positioning of cutter/bit exposure from the
table surface.
After making adjustments, it is extremely impor-
tant to always lock the spindle in place before
operating the shaper. Otherwise, the spindle posi-
tion can easily shift, causing inconsistent cutting
results from workpiece to workpiece.
3. Lock spindle into position with lock knob.
Figure 22. Spindle elevation adjustment lever.
Elevation Adjustment
Lever
Summary of Contents for G0510ZW
Page 16: ...5mm Hardware Recognition Chart...
Page 52: ...50 Model G0510ZW Mfd Since 9 16...
Page 56: ......
