Model G0495X (Mfd. Since 07/19)
-13-
Box 1 (Figures 4–5)
Qty
A. Jointer Assembly (not shown) .................... 1
B. Hex Wrench 3mm ....................................... 1
C. Hex Wrench 4mm ....................................... 1
D. Hex Wrench 5mm ....................................... 1
E. Hex Wrench 6mm ....................................... 1
F. Hex Wrench 8mm ....................................... 1
G. Open End Wrench 12/14mm ...................... 1
H. Open End Wrench 14/17mm ...................... 1
I. Phillips Head Screwdriver........................... 1
J. Push Blocks ................................................ 2
K. T-Handle T-25 Torx Driver ......................... 2
L. Inserts 15 x 15 x 2.5 ................................... 5
M. Flat Head Torx Screws #10-32 ................. 10
N. AAA Batteries (not shown) ......................... 2
Figure 4. Tools inventory.
B
C
D
E
F
G
H
I
J
Figure 5. Helical cutterhead hardware.
K
L
M
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
