-22-
Model G0495X (Mfd. Since 07/19)
Fence Movement: The fence has a lock that
keeps it in position (see
Figure 16). To move the
fence, loosen the lock and turn the fence adjust-
ment wheel to slide the fence where needed, then
retighten the lock.
Fence Tilting: The tilt lock (see Figure 17)
secures the fence at any position in the available
range. The stop block locks the fence for 90° cuts.
Two positive stops stop the fence at 45° inward
and 45° outward for common bevel cuts. Even
when the fence is resting against the positive
stops, the tilt lock must be tightened before cut-
ting. Also, the stop block must be disengaged for
45° outward bevel cuts.
Table Movement: To move the infeed or outfeed
tables, loosen the table locks (see
Figure 15),
move the tables with the infeed or outfeed
handwheels (see
Figure 14), then tighten the
table locks.
Figure 16. Fence lock location.
Adjustment
Wheel
Fence
Lock
Figure 15. Table control locations.
Outfeed
Table Lock
Infeed
Table Lock
Outfeed
Handwheel
Infeed
Handwheel
Figure 17. Tilt lock and stop block locations.
Tilt Lock
45° Outward
Stop
Stop Block
90° Stop
45° Inward Stop
