Model G0495X (Mfd. Since 07/19)
-55-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
Labels & Cosmetics
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
200V2
201
202
203
204
205
206
207
208
209
210
211
212
216
217
WARNING!
Date
Mfd. for Grizzly in Taiwan
S/N
Specifications
MODEL G0495X
8" HELICAL CUTTERHEAD
JOINTER w/DIGITAL READOUT
To reduce the risk of serious injury when using this machine:
1. Read & understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet
4. Except when rabbeting, keep all guards in place and in
proper operating condition. Always replace the guard after
rabbeting.
5. Never cut workpieces smaller than 8" long, 3/4" wide, or
1/2" thick.
6. Always use push blocks when face planing.
7. Keep hands at least 12" away from cutterhead.
8. Never cut deeper than 1/8" on a single pass.
9. Tie back long hair, roll up sleeves, and DO NOT wear loose
clothing, gloves, or jewelry.
10. Turn motor OFF and disconnect power before changing
inserts, adjusting tables/fence, or servicing.
11. Be aware of "kickback" hazards and how to prevent them.
12. Always support the workpiece against the fence and table.
Never attempt any operation free-handed.
13. Always feed workpiece against cutterhead rotation. Never
move workpiece backward during operation.
14. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Motor: 3 HP, 230V, Single-Phase, 60 Hz
Full-Load Amp Draw: 12A
Cutterhead: Helical w/Indexable Inserts
Replacement Inserts: H9893 (10-Pack)
Cutterhead Diameter: 3-1/16"
Maximum Depth of Cut: 1/8"
Maximum Rabbeting Depth: 1/2"
Cutterhead Speed: 7,000 RPM
Cuts Per Minute: 28,000
Table Size: 8" x 83"
Fence Tilt: 45°, 90°, 135°
Weight: 596 lbs.
REF
PART #
DESCRIPTION
REF PART #
DESCRIPTION
200V2 P0495X200V2 MACHINE ID LABEL V2.02.19
208
P0495X208
GRIZZLY NAMEPLATE-LARGE
201
P0495X201
CUTTERHEAD GUARD LABEL
209
P0495X209
MODEL NUMBER LABEL
202
P0495X202
FENCE/CUTTERHEAD LABEL
210
P0495X210
SAFETY GLASSES LABEL
203
P0495X203
ELECTRICITY LABEL
211
P0495X211
HEARING/RESPIRATOR LABEL
204
P0495X204
DISCONNECT POWER LABEL
212
P0495X212
TOUCH-UP PAINT, GRIZZLY PUTTY
205
P0495X205
READ MANUAL LABEL
216
P0495X216
DO NOT OPEN COVER LABEL
206
P0495X206
TOUCH-UP PAINT, GRIZZLY GREEN
217
P0495X217
BATTERY INSTALL HANGING TAG
207
P0495X207
EXTREME SERIES PLATE
