Model G0495X (Mfd. Since 07/19)
-19-
Test Run
Once assembly is complete, test run the machine
to ensure it is properly connected to power and
safety components are functioning correctly.
If you find an unusual problem during the test run,
immediately stop the machine, disconnect it from
power, and fix the problem BEFORE operating the
machine again. The
Troubleshooting table in the
SERVICE section of this manual can help.
DO NOT start machine until all preceding
setup instructions have been performed.
Operating an improperly set up machine
may result in malfunction or unexpect-
ed results that can lead to serious injury,
death, or machine/property damage.
Serious injury or death can result from
using this machine BEFORE understanding
its controls and related safety information.
DO NOT operate, or allow others to operate,
machine until the information is understood.
To test run the machine:
1. Clear all setup tools away from machine.
2. Connect the machine to the power source.
The power light will illuminate.
—If the light does not illuminate, check the
power connection.
3. Push the STOP button in, then twist it clock-
wise so it pops out. When the STOP button
pops out, the switch is reset and ready for
operation (see
Figure 13).
Figure 13. Resetting the STOP button.
