Grizzly AKS 2440 Lion, Translation Of The Original Instructions For Use

Page: 148 / 228

148
GB
4)
POWER TOOL USE AND CARE
a)
Do not force the power tool. Use
the correct power tool for your ap -
plication.
The correct power tool will
do the job better and safer at the rate
for which it was designed .
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired .
c)
Disconnect the plug from the pow -
er source and/or the battery pack
from the power tool before making
any adjustments, changing acces -
sories, or storing power tools.
Such
preventive safety measures reduce
the risk of starting the power tool ac-
cidentaIly .
d)
Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper ate
the power tool.
Power tools are dan-
gerous in the hands of untrained users.
e)
Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use.
Many accidents are caused by
poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
g)
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use
of the power tool for operations differ -
ent from those intended could result in
a hazardous situation.
h) If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified
person in order to prevent hazards.
5) CAREFUL HANDLING AND USE
OF BATTERY DEVICES
• Charge the batteries only in chargers
that are recommended by the man -
ufacturer. Risk of fire if a charger
that is suitable for a specific type of
battery is used with other batteries.
• In the power tools, use only the
batteries designed for the purpose.
The use of other batteries may re -
sult in injuries and risk of fire.
• Keep the unused battery away
from paper clips, coins, keys, nails,
screws and other small metal ob -
jects, which could cause bridging
of the contacts. A short circuit
between the battery contacts may
cause burns or fire.
• If used incorrectly, liquid may leak
from the battery. Avoid contact with
this. In the event of accidental contact,
rinse off with water. If the liquid gets
into eyes, seek medical assistance.
Leaking battery fluid may cause skin
irritations or burns.
6)
SERVICE
a)
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained .