Grizzly AKS 2440 Lion, Translation Of The Original Instructions For Use

Page: 163 / 228

163
GB
blade and re-tighten the fixing
screw (23a).
The round lug (23b) of the
tensioning screw must point to-
wards the chain sprocket.
4. Assemble the blade (4), the
sawing chain (5) and the chain
wheel cover (15) and tension
the sawing chain.
Maintenance Interval Table
Machine part Action
Before every
use
After 10 hours
of operation
Components of the
chain brake
Check, replace if required

Sprocket chain wheel Check, replace if required

Saw chain (5) Check oil, regrind or replace
if required

Guide bar (4) Check, turn round, clean and
oil
 
Battery (19)
Check state of charge,
charge if required

Storage
• Clean the equipment before putting it
away.
• Empty the oil tank before longer peri-
ods of non-use. Dispose of waste oil
environmentally correctly (see „Waste
disposal and environmental protection“).
• Put on saw bar protection sheath.
• Store the appliance in a dry place well
out of reach of children
• Before a longer period of storage (e.g.
over winter), remove the battery from
the equipment.
• Only keep the batteries partly charged.
The charge condition should be 40-
60% during a longer storage period.
• During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every 3
months
• Store the equipment between 10°C
and 25°C. Avoid extremes of cold
and heat during storage, in order to
prevent impairment of battery perfor-
mance.
Maintenance intervals
Regularly carry out the maintenance
operations listed in the following ta-
ble. The life of the saw is extended
by regular maintenance of your
chainsaw. Furthermore, you get opti-
mum cutting performance and avoid
accidents.