Grizzly AKS 2440 Lion, Translation Of The Original Instructions For Use

Page: 144 / 228

144
GB
Function description
The cordless chainsaw has a lithium ion re-
chargeable battery and a battery charger.
The tool is fitted with a rapid-action chain-
tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various pro-
tection fittings for the protection of the user.
Refer to the following descriptions for the
function of control elements.
Technical Data
Cordless chainsaw ..AKS 2440 Lion Set
Rated input voltage.......................24 V
Chain speed v
0
..............................4.2 m/s
Weight (with guide rail and chain,
without guide rail and chain) ..........3.13 kg
Oiltank ..............................................40 ml
Chain bar ................Oregon 100SDEA041
Chain ...........................Oregon 91PX040X
Chain pitch........................... 3/8“ (9.5 mm)
Number of chain drive links ...................40
Chain width ....................................1.3 mm
Teeth of the sprocket chain wheel ...........6
Length of the chain bar .................250 mm
Acoustic pressure level
(L
pA
) ........................ 71 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured ........ 91,6 dB(A); K
WA
= 4.4 dB
guaranteed .............................. 96 dB (A)
Vibration (a
h
)
front handle .......1,98 m/s
2
; K = 1,5 m/s
2
rear handle ..........3,5 m/s
2
; K = 1,5 m/s
2
Akku (Li-Ion) ............................ 24LB4005
Nominal voltage ............................24 V
Capacity.......................................... 2.0 Ah
Energy ............................................86 Wh
Battery cells .......................................... 12
Charging time ...................... approx. 7-9 h
Recharger ............... HYCH0132400500G
Voltage
input ......... 100-240V; ~50/60Hz; 0.32 A
Voltage output...................24V 500 mA
Protection class .................................. II
Protection category............................IPX0
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).