5.0 AUTOMATIC MODE
KOLORSTREAM has to be set to
MASTER ON
to be accessed it in automatic mode. Push
SELECT, when
1.OF
is displayed push (+) or (-) to obtain
1.ON
. Now press ENTER . The unit is
set to
MASTER ON
. The unit starts working in automatic mode and is ready for the programming
procedure.Push SELECT and the following will be displayed: (P.=01)
Choose the desired programme by pushing (+) and(-);
8 programmes are available as per picture 1.
Pushing (+) after programme 8 or (-) before programme 1 the display will show relevant (C.01) or
(C.60)
Push keys (+) and (-) to select one of the 60 colours available.
Colour changing speed can be determined by pushing SELECT. When the display shows (SP.1):
push (+) and (-) to set the speed.
Colour scene and positioning length are described in picture 2.
Colour scene length can be customised by pushing SELECT.When the display shows (PA.0):
act on (+) or (-) to set the colour scene length. Pre-set colour scene length
can be checked in picture 3.
Aperture angle projection can be customised by pushing SELECT. When the display shows
(An.0):
push (+) or (-) to adjust the aperture. The higher is the value on the
display the widder is the angle degree.
To see the automatic colour scene sequence while it is automatically revolving push ENTER
repeatedly.
Push SELECT, then (+) or (-), as above mentioned, to select a new programme.
P.
EFFECT
Prog.1 Red, Magenta, Yellow
Prog.2 Red, Magenta,White
Prog.3 Green, Cyan, Yellow
Prog.4 Green, Cyan, White
Prog.5 Blue, Cyan, Magenta
Prog.6 Blue, Cyan, M White
Prog.7 All colors
Prog.8 All White
SP
Positioning length
1
2 sec.
2
4 sec.
3
6 sec.
4
8 sec.
5
11 sec.
6
16 sec.
7
21 sec.
8
26 sec.
9
1 sec.
Pict. 2
Pict. 1
PA.
Colour scene length
0
4 sec.
1
15 sec.
2
30 sec.
3
1 min.
4
1,5 min.
5
2 min.
6
2,5 min.
7
3 min.
8
3,5 min.
9
4 min.
Pict. 3
16
