SET-UP: Press the MENU key and go through the menu by using the UP and DOWN keys until the writing "-4- Timer" appears
on display; push the ENTER key to access the menu and to select one of the 2 available timers through the UP and DOWN
keys; press ENTER to confirm.
Counter 1 - It visualizes the operating hours of the lamp.
Counter 2 - It visualizes the operating hours of the projector.
Function 3 - It allows the user to reset the counter relevant to lamp life; press ENTER to confirm the
zero setting of the counter or press the ESC key to exit.
5- Temperature:
It allows the user to visualize the temperature inside the ballast and inside the moving head.
SET-UP: Press the MENU key and go through the menu by using the UP and DOWN keys until the writing "-5- Temperature"
appears on display; press the ENTER key to access the menu and to select one of the 2 available functions through the UP and
DOWN keys, press ENTER to confirm.
1 - It visualizes the temperature inside the ballast
2 - It visualizes the temperature inside the moving head
6- Calibrations:
It allows the user to perform calibrations. Since the projector is released thoroughly rated, it is suggested not to
modify any value inside this memory unless a sensor has been replaced. To access this menu it is necessary to enter a security
code, which is available on request.
4.3 DMX Mode
Every single ACROBAT PE 1200 unit must have its relevant DMX
address correctly set up. Every ACROBAT PE 1200 unit uses 20
channels. Set each projector as per table on the side, in order to be
able to control them separately.
4.4 Indicating the channels
17
ENGLISH
Address
20 Channels
Projector 1
0 0 1
Projector 2
0 2 1
Projector 3
0 4 1
Projector 4
0 6 1
Projector 5
0 8 1
Projector 6
1 0 1
Projector 7
1 2 1
Projector 8
1 4 1
Projector 9
1 6 1
Projector 10
1 8 1
4. T
Timer
2. P
Projector L
Life
Main M
Menu
5. T
Temperature
5. T
Temperature
1. B
Ballast T
Temp
5. T
Temperature
2.Moving h
head ttemp
4. T
Timer
3. L
Lamp llife rreset
4. T
Timer
1. L
Lamp llife
Summary of Contents for ACROBAT PE 1200
Page 23: ...23 ENGLISH...