SET-UP: press the MENU key and go through the menu by using the UP and DOWN keys until the writing "-Change Address"
appears on display; press the ENTER key to access the menu and select the address through the UP and DOWN keys, press
ENTER to confirm.
3- Options:
14 options are available, that is the additional functions of the projector.
SET-UP:
1) Press the MENU key and go through the menu with the UP and DOWN keys until the writing "-3 Options" appears on dis-
play; press ENTER to access the menu.
2) Through the UP and DOWN keys select the option to be set (from 1 to 14); press ENTER to confirm;
OPTION 1 - Reversing Pan and Tilt: select On to reverse Pan and Tilt movements.
OPTION 2 - Reversing Pan: select On to reverse Pan movement.
OPTION 3 - Reversing Tilt: select On to reverse Tilt movement.
OPTION 4 - Free color wheel: select On to set the color wheels free, that is their position depends on the
value of the Controller's DMX signal.
OPTION 5 - Half-colors: select On to set the color wheels between one color and the next one, according
to the value of the DMX signal.
OPTION 6 - Shake: select On to obtain the shake effect with the gobo wheels and the prism positions.
OPTION 7 - Demo: select On to execute all the available functions of the projector. Selecting this option
corresponds to performing a test.
OPTION 8 - Setting the lamp: select On to set the lamp through DMX signal.
OPTION 9 - Fans speed: select On to set the speed of the fans by means of the temperature sensors. Select
Off to set the maximum speed of the fans.
OPTION 10 - Gobo change black-out: if On is selected each time a gobo is changed, during the passage
from one image to the next one the black-out is performed.
OPTION 11 - Color change black-out: if On is selected each time a color is changed, during the passage
from one color to the next one the black-out is performed.
OPTION 12 - Prism change black-out: if On is selected each time a prism is changed, during the passage
from one prism to the next one the black-out is performed.
OPTION 13 - Zoom black-out: if On is selected each time the zoom is adjusted, the shutter closes. The
shutter will open again, when adjustment is over.
OPTION 14 - Exclude Encoder: if On is selected, this function excludes the electronic correction system
for the pan and tilt movements. As a rule, this function may be useful if one of the two sensors gets dama-
ged, which would prevent the projector from operating.
4- Timer:
It allows the user to visualize the counters relevant to the lamp and projector lives.
16
ENGLISH
2.Change A
Address
esc 11 E
Enter
Main M
Menu
3. O
Options
3. O
Options
1. P
Pan T
Tilt R
Rev
3. O
Options
2. P
Pan R
Rev
3. O
Options
3. T
Tilt R
Rev
3. O
Options
4. F
Free C
C. W
Whl
3. O
Options
5. H
Half-ccolors
3. O
Options
8. L
Lamp S
Setting
3. O
Options
9. F
Fans s
setting
3. O
Options
10.
Gob cchan B
B.Out
3. O
Options
13. Z
Zoom B
B. O
Out
3. O
Options
14.Exclude E
Encod
3. O
Options
112
2.. P
Prrii cch
ha
an
n B
B.. O
Ou
utt
3. O
Options
11.
Col cchan B
B. O
Out
3. O
Options
7. D
Demo
3. O
Options
6. S
Shake
Main M
Menu
4. T
Timer
Summary of Contents for ACROBAT PE 1200
Page 23: ...23 ENGLISH...
