Frankenrunner User Manual
Rev 1.0
125°C. For convenience we have provided a drop-down selection of the three
thermistor types commonly used on hub motors. For other temperature devices,
these values can also be input manually instead.
This feature allows for safe operation of motors even without a V3 Cycle Analyst.
If you have a Cycle Analyst we recommend using the CA3’s thermal rollback
features and leaving the controller’s rollback unchecked.
6 Additional Details:
6.1 Signal Mapping
The
Frankenrunner
uses the analog Brake 1 signal input as both the throttle and
regenerative brake signal source. This differs from the earlier Phaserunner
controllers which used separate signals for “Throttle Sensor Source” and “Regen
Brake Source”, which were then shorted externally in the connector wiring.
The nominal 'throttle' input of the controller is now mapped as a torque sensor
input, while inputs that were previously unused are now being used.
-19-
