Griesser SoloTel 2, Manual

Page: 7 / 11

© elero GmbH 12 | EN © elero GmbH EN | 13
Intermediate positions of the blinds
Roller shutter Awning Venetian
blinds Interior
shading
Pos ▼ Intermediate
position Intermediate
position Intermediate
position Intermediate
position 1
Pos ▲ Ventilation
position -- /fabric ten-
sioning Tilting posi-
tion Intermediate
position 2
Programming the intermediate position in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is in the top end
position.
1. Move the blind to the required position using the DOWN button.
In doing so, keep the DOWN button pressed.
2. Also press the STOP - button. The blind will stop. The status
display lights brie fl y.
The intermediate position is programmed.
Programming the ventilation/tilting position in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is at its lower end
position.
1. Use the OPEN button to move the blind in the OPEN direction
until the ventilation gaps open or the slats are inverted. Keep the
OPEN button pressed during the movement.
Stopping programming mode (bidirectional) in the
transmitter
Press the STOP button for at least 6 seconds until the status
display lights orange.
Approaching end positions of roller shutter /
awning / Venetian blind
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set.
Approaching bottom end position (roller shutter/awning)
Press the DOWN button brie fl y. The blind moves to the bottom end
position/the awning extends completely.
Approaching the lower end position (Venetian blind)
Press the DOWN button until the status display lights brie fl y. The
blind approaches the lower end position.
Only press the
DOWN button brie fl y (jog mode) for Venetian blind
drive, pulse mode for Combio JA Pulse), the blind approaches
brie
fl y and stops again.
Approaching top end position (roller shutter/awning)
Press the OPEN button brie fl y. The blind approaches the upper end
position/the awning retracts.
Approaching the upper end position (Venetian blind)
Press the OPEN button until the status display lights brie fl y. The
blind approaches the upper end position.
Only press the
OPEN button brie fl y (jog mode) for Venetian blind
drive, pulse mode for Combio JA Pulse), the blind approaches
brie
fl y and stops again.
Explanation of functions Explanation of functions