Griesser SoloTel 2, Manual

Page: 4 / 11

© elero GmbH 6 | EN © elero GmbH EN | 7
On the back of the device
5
6
5 Learn button P
Explanation of functions
Bidirectional radio system
A bidirectional radio system transmits radio signals to a radio
receiver and enables feedback from the radio receiver to the
transmitter. The radio signal can be sent directly to the target
receiver. If this is not possible then the radio signal is forwarded via
other bidirectional participants until the signal reaches the target
receiver. The target receiver carries out the command and sends a
con
fi rmation back to the transmitter.
Bidirectional radio operation is only possible if all participants are
bidirectional. Otherwise, the system is only unidirectional.
Unidirectional radio system
A unidirectional radio system transmits radio signals to radio
receivers. However,in contrast to the bidirectional radio system,
the radio receivers cannot send back a reply to the transmitter. The
transmission of radio signals from radio receiver to radio receiver is
also not possible.
Initial operation
Press a button to switch on the handheld transmitter; the status
display is illuminated.
Mounting of wall bracket
• The wall bracket must be fi xed so
that the drill holes do not touch
any electrical cables.
• Before installing the unit in the
required position, check that
the transmitter and receiver are
functioning perfectly.
• Attach the bracket to the wall
with the wall plugs and screws
provided.
Device explanation
Front of device
1
2
3
4
Status indicator
2
UP button
3 STOP button
4 DOWN button
85
85
7,5
7,5
Mounting of wall bracket Explanation of functions