Gregoire Besson SP9 COMPACT, Instruction Of Utilization And Maintenance

Page: 85 / 108

CHAPTER X - ADDITION OF THE SUPPLEMENTARY PLOUGH –- Page 1
10. ADDITION OF THE SUPPLEMENTARY PLOUGH
10.1. SAFETY DEVICES
This operation requires such protective equipment for supporting plough and plough
fastening, for lifting the supplementary plough bottoms as helmet, protective goggles
and gloves as well as safety shoes in good conditions.
Never let it be improvised if you deal with this protecting equipment, connect with your
GRÉGOIRE-BESSON dealer.
The plough must be attached to the tractor normally.
10.2. ASSEMBLE THE SUPPLEMENTARY PLOUGH BOTTOM
1. Before starting the operation put the towing device to smooth ground.
2. Turn the plough side to horizontal position, stocks don’t touch the ground, keep 15 cm
distance beetwen ground and stocks.
3. Stop the motor and apply the parking brake, get out the starting key and put it to own
pocket.
4. Dismount from beam the plate and the signal consol.
5. With lifting device put the plough bottom to beam, mount all 12 screws and fastening
them,connect it to plough correctly. Dismount from lifting device the plough bottom.
6. Pour le raccord de la sécurité hydraulique : (option)
5.
After that put the whole last plough bottom together with the wheels behind the
supplementary plough bottom. Fasten well the bolt 12.
6. A hidraulika biztosítás (opció) csatlakoztatatásához:
•
Csavarozza le a hidraulika kör szorítógy ű r ű jét az utolsó eketesten.
•
Kapcsolja össze a hidraulika csatlakozót.
IMPORTANT : The security hydraulic connections should be screwed to the end to have the
securities of the supplementary plough bottoms work properly. The ploughs union nut must
impact the suitable part of the connection base.