Gregoire Besson SP9 COMPACT, Instruction Of Utilization And Maintenance

Page: 25 / 108

Operation manual SP 9 - Compact
CHAPTER II – GENERAL SAFETY – Page 11
2.19. DO NOT PERFORM ADJUSTING ON THE MOVING PLOUGH
DANGER IS SERIOUS INJURY OR DANGER! NEVER TRY TO ADJUST, CLEAN OR GREASE
THE MOVING PLOUGH!
If somebody tries to do any repair
work on the moving plough, it can be
very dangerous because of sudden
jerking or losing the balance or abrupt
maneuvered or because of something
else the foot or leg can slide and be
caught by the machine. Because of
the falling the person can be injured or
even killed. It is serious risk of life!
2.20. WATCH THE DANGER OF CUTTING OR GETTING
NIPPED
Never interfere with your hand or foot into the moving parts.
The mobile, moving parts can cause cutting, getting nipped or getting injured during the plough
work or attaching on or off.
If the plough is equipped with disc coulters they may cause serious injury if you fall under the
plough.
They can be fatal injuries.
 Be very careful of different injuries, cuttings and getting nipped. Your hands and feet or legs are
the most endangering parts of your body.
2.21. BE ATTENTIVE WITH SWINGING
Be careful during the swinging of the moving parts (front furrow width,
changeable width, securities, lifting, plough turning up, reversing etc.).
Pay attention that nobody and nothing should be in the area of plough
motion. And even pay double attention during maneuver, change of
direction or backing.