Gregoire Besson SP9 COMPACT, Instruction Of Utilization And Maintenance

Page: 89 / 108

Operation manual SP 9 - Compact
CHAPTER XI - GREASING AND MAINTENANCE –- Page
3
11.2.3. WORK IN THE AIRED PLACE
¾
In the workshop where the maintenance is performed the
place should be properly aired.
¾
Never leave the tractor engine go in the closed building.
The exhaust can cause asphyxia or cancer.
11.2.4. WORK IN THE CLEAN PLACE
¾
Think over the necessary place to have proper
maintenance.
¾
Take care that the place is always kept clean, in order
and dry.
¾
Put away and store the dismounted spare parts. For
small spare parts use storage boxes.
11.2.5. PUT SECURITY SUPPORTERS
Generally before the maintenance or repairing the plough must be put down.
If it should be kept up:
¾
Put the tractor in the «Parking» position and putt the tractor hand
brakes. Support the plough wheels.
¾
Do not neglect tractor or plough hydraulic cylinders. If any element
of hydraulics breaks away or leaks it may be dangerous because
of injuries.
¾
Every element of the machine must be supported if you are going
to work under it.
¾
Do not support the machine with wood, concrete or stop pieces,
they can break, slip, roll off.
¾
Do not use screwing hydraulic elevator (crick).
¾
Use supporters in accordance with the security norms (size,
loading etc.).
ATTENTION: Be careful while you are working under the machine. If
you want to maneuver with the plough, be sure there is nobody under
the machine.
11.2.6. DISCHARGING OF THE ACCUMULATOR
Before welding or any other interference in the electric circuit, pull the
negative cable out of the accumulator.(-).