GreenTec HX 170, Handbook

Page: 22 / 27

Cutterbar HX 170-230-270
22
Storage
Carefully clean the machine before placing it in storage. Remove all traces of wood
chips and dirt. Dirt attracts moisture and results in corrosion. Be careful. Never use
high-pressure watercleaner close to the finish. Be very careful with steam cleaning.
Rinse off all cleaning agents to prevent discoloration or damage to the finish. Grease
all greasepoint until fresh grease emerges. The machine must be stored under covers
or indoors to protect it from rain and sunlight. Place the machine on a level surface.
Remember that regular maintenance greatly extends the service
life of the machine.
Caution!
Before attempting to repair, maintain or adjust the
machine, check that the knife has stopped, the ignition key
is removed, the PTO disengaged, the parking brake
engaged and that the head rests safely on the ground.