Cutterbar HX 170-230-270
20
Avoid twisting the fittings when replacing a hose. Use two single-head wrenches to
loosen and tighten hoses etc. Hoses will be impaired if they are twisted during
installation. Pressure pulses in twisted hoses tend to stress the steel net of the hose.
See Illustration 1.
Always ensure that protective hoses are in good condition. It is cheaper to replace a
protective hose than to replace valuable hoses.
Illustration 1.
The warranty on the hoses covers only the replacement of hoses due to defective
materials or manufacturing defects. The warranty does not cover the following:
1. Hoses that are damaged due to rubbing
2. Wear and tear
3. Hoses that have been cut or crushed during operation
4. Damage to threads due to excessive tightening
BSP
(size)
Tightening torque
¼”
24 Nm
18 ibs/ft
⅜”
33 Nm
24 ibs/ft
½”
44 Nm
35 ibs/ft
¾”
84 Nm
62 ibs/ft
1”
115 Nm
85 ibs/ft
Summary of Contents for HX 170
Page 1: ...5th Edition 2017...
Page 2: ...Cutterbar HX 170 230 270 2...
Page 27: ...Cutterbar HX 170 230 270 27...
