GreenTec HX 170, Handbook

Page: 14 / 27

Cutterbar HX 170-230-270
14
Product Description
The Cutterbar primarily consists of a non-movable lower knife and a movable upper
knife that both are made from Hardox steel and driven by an hydraulic ram. The
double-effect cylinder is controlled by a reversing valve with a nonadjustable splitter
valve that is operated over a suspended bottom adjustment. The suspended bottom
adjustments are directly connected to the ramrod, thereby allowing the smooth rotation
of the cutting direction.
The basic tool is mounted using a mounting arm with high pressure hydraulic hoses
The knife guard may be mounted on the Hedge cutter using the extension spring.
Specifications
Cutterbar for mounting on hydraulically driven Armmowers.
Consists of two Hardox cuttings edges that are hydraulically driven over a flow divider,
two-way valve and hydraulic ram. The cutting edges are operated via external oil
supply from the hydraulically driven vehicle.
The Cutterbar may be fitted with an adapter to facilitate mounting on various vehicles.
The hydraulic system is completely covered.
Description GreenTec HX 170 – 230 - 270
Operating width 1700 - 2300 - 2700mm
Oil level 45-85 L/min (integrated flow divider)
Operating pressure 200 bar
Hydraulic Mode Soft turn control
Weight 190 – 220 - 250kg
Steel quality, cutting edge Hardox
Work output 5 – 110mm branches
Stroke frequency 55-65 double strokes per minute
Work application Vert/- 45
0