GreenTec 9991902C-25, Instruction Manual

Page: 61 / 76

FOX
MULTI CA
R
R
IER
53
6. INSPECTION AND MAINTENANCE (e, r)
To ensure a long working life of the machine, good and careful maintenance and inspection is required.
Remember that the machine is designed to withstand the harshest conditions, and with a little care and
attention it will be able to give you many years of trouble-free operation.
To avoid problems and to ensure that the warranty covers, always use original GreenTec parts and make sure
that the machine is not used for anything other than described in this instruction manual.
The owner or the operator must ensure that the machine is only used, maintained, inspected and repaired by
persons who are familiar with the procedures associated with it and are instructed in the associated hazards.
If doubts arise in connection with any of the mentioned
procedures, an authorized specialist workshop or
importer should be consulted.
(See:
www.greentec.eu )
Repair work not described in the
instruction manual may only be carried
out by authorized specialist workshops.
INFRINGEMENT OF ONE OR MORE SAFETY INSTRUCTIONS MAY CAUSE:
Great danger to persons due to mechanical and chemical influences!
Danger to the environment due to leakage of hydraulic oil! Damage and
defects to the machine, FOX Multi Carrier or vehicle!
The warranty on the machine lapses if one or more of the safety instructions
are violated.
GreenTec is not liable for any compensation for damage caused by incorrect
use of the machine as well as incorrect connection or connected equipment,
or by incorrect maintenance of the machine.