GreenTec 9991902C-25, Instruction Manual

Page: 28 / 76

FOX
MULTI
C
AR
R
IER
20
4.3.5 HYDRAULIC HOSE SET
FOX Multi Carrier is intended for mounting on
the front of vehicles, and a complete hose set
of approx. 2x2.5 m, both for mounting on the
vehicle's hydraulic system and the attachment
tool in use.
The hose set consists of 3 types of hoses
(
pressure , drain and return ), incl. associated
stickers, fittings, plugs and hose protection
sleeves.
4.4 APPROVED ATTACHMENT TOOLS (n)
Remember, that when assembling with attachment tools other than GreenTec
produced or approved, it is the sole responsibility of each operator to ensure
that the vehicle and the overall machine comply with the applicable
requirements and relevant directives!
When mounting on equipment other than GreenTec, a new risk assessment
of the equipment used must be submitted!
If the FOX Multi Carrier is fitted with an unapproved attachment tool, the risk
assessment basis lapses, and thus the validity and guarantee of the
declaration of conformity!
FOX Multi Carrier is intended for installation with the following approved GreenTec attachment tools
and accessories:
APPROVED ATTACHMENT TOOLS AND ACCESSORIES:
Description:
FOX Multi Carrier
Kantklipper RI 60 & 80
●
Ukrudtsbørste BR 70
●
Accessories:
Nakkebeslag
●
eller 3-punkts ophæng
Table 8 – G Approved attachment tools and accessories: FOX Multi Carrier
Hydraulic hose set + various accessories: FOX Multi Carrier