GreenTec 9991902C-25, Instruction Manual

Page: 48 / 76

FOX
MULTI
C
AR
R
IER
40
5.2.5 INSTALLATION / MOUNTING OF ATTACHMENT TOOL ON THE FOX MULTI
CARRIER
For further instructions on mounting a specific attachment tool on the FOX
Multi Carrier
, always refer to the individual attachments tool’s instruction
manual and instructions therein.
Instruction books and other materials are always available on GreenTec's
website:
Technical documentation - GreenTec attachment tools
5.2.6 MOUNTING THE FOX MULTI CARRIER ON VEHICLE
MOUNTING WITH 3-POINT LINKAGE:
1. Adjust and carefully drive the vehicle's lift
arms to the 2 lower linkages on the FOX
Multi Carrier.
The vehicle is carefully steered so that the
vehicle's lift arms are adapted to the lower 2
linkages.
The lift arms are secured by the means of
locking the safety rivets through the
linkages.
2. The top link from the vehicle is adjusted to
the upper linkages on the FOX Multi Carrier.
Be sure to adjust the top link so that the FOX
Multi Carrier hangs vertically.
The multi-carrier must not be tilted either
forwards or backwards towards the vehicle.
3. Carefully start lifting the FOX Multi Carrier.
The FOX Multi Carrier support legs are
mounted on both sides using safety rivets
with ring splits.
The supporting legs are now adjusted up to
the working position via the bottom hole.