GreenTec 9991902C-25, Instruction Manual

Page: 23 / 76

FOX
MULTI CA
R
R
IER
15
4.2 USE OF THE MACHINE
4.2.1 INTENDED USE OF THE MACHINE (g)
For any use of the machine other than that described in this section,
GreenTec is not liable for any damages resulting therefrom.
The responsibility then rests solely with the operator.
The FOX Multi Carrier are available in several variations and sizes, but they all have the same basic
structure and operation and are therefore similar.
The machine is primarily used with a dedicated attachment tool for mowing grass, hedges and fences
as well as cleaning sidewalks.
•
See specifications on the machine. ( Table 9 – page 21)
4.2.2 APPLICATION AND RESTRICTIONS OF THE MACHINE h)
The capacity of the various FOX Multi Carriers is limited by the size of the hydraulic motor on the attachment
tool, the oil flow it is supplied with, the amount of material to be cut, and of course the speed at which it is
driven.
The owner of the machine / operator is responsible for compliance with the
following rules::
The vehicle on which the machine is mounted must live up to the requirements for machines approved
for agriculture.
Under no circumstances should all safety values be exceeded.
•
Safety distances, pressure, flow, rpm, etc.
Never use the machine without safety guards fitted.
The machine must never be used for the transport of persons, animals or other equipment than
described in this instruction manual.
That the stability of the load-bearing vehicle is sufficient:
•
See the section on Stability (page 44), as well as the instruction manual for used attachment tools
and vehicles.
The FOX Multi Carrier and attachment tool must never be used as a "crane" or other type of lifting
equipment.
Safety guards on the attachment tool in use can never work 100%!
Depending on the conditions being driven on and under, there will be a
possibility that serious fragments / material may come flying and damage
people or material. Therefore, distance must always be kept!