Remote Cable Cutter
15
52087760 REV 1
© 2021 Greenlee Tools, Inc.
• Do not perform any maintenance other than
as described in this manual.
Personal injury or
damage to the tool may result.
• Do not open the tool.
It contains no user-
serviceable parts
Storage
Remove batteries from the tool and remote before
extended storage. If necessary, recharge the batteries.
Refer to the instructions supplied with the battery
charger.
Maintenance
Catalog
Number
Description
05167
BATTERY, 18V LI-ION 4.0AH
52178
CHARGER, BATTERY - 120V
52180
CHARGER, BATTERY – 12V
52179
CHARGER, BATTERY – 230V
BTC3-LH RMT CNTRL, BHT LIFT HARNESS
BTC3-LR RMT CNTRL, BHT LIFT RING
BTC3GL
REMOTE CONTROL
BTC3-CK RMT CNTRL KIT
BTC3-GR RMT CNTRL, BHT GRND RING
Routine Service
Calendar
Service
Date
Notes
Date Placed into
Service
Date of First Factory
Service
Date of Second
Factory Service
Date of Third Factory
Service
Date of Fourth
Factory Service
Date of Fifth Factory
Service
Date of Sixth Factory
Service
Date of Seventh
Factory Service
Date of Eighth
Factory Service
Date of Ninth Factory
Service
Date of Tenth Factory
Service
Use this schedule to help track when your tool is due in
for factory service.
• Failure to follow required service schedule could
compromise the tool and result in serious injury.
Service
At either 3 years or 10,000 cycles, the tool will stop
working and factory service of the tool must be
completed before tool will resume working. Factory
service includes general inspections, replacement of
tool's di-electric hydraulic oil and testing of tool by
trained technicians.
When the Factory Service Date is approaching or arrived,
contact Greenlee Customer Service. Expedited shipping
is available.
• Clean the housing with a damp cloth and mild
detergent after every use. Dry completely, remove the
battery and fully retract the blade before storing.
• Do not sharpen blades, send in for service to replace
blades.
