background image

Remote Cable Cutter

11

52087760 REV 1

© 2021 Greenlee Tools, Inc.

Bluetooth/I-Press App

This tool has Bluetooth capability that allows it to communicate with the Greenlee i-press App on your smart device.
1.  Install the “i-press Klauke Software Solutions” app from the App Store or Google Play. Open the app on your 

smart device and select the “Greenlee” option.

2.  Switch on the Bluetooth function on your smart device and activate the tool to establish a connection.
3.  The app will allow you to create projects, personalize your tool, display tool pressure readings, battery charge, 

the last service date, and more.

Instructions how to use the app are shown in the i-press app itself; alternately, request MA6864 brochure from any 

Greenlee distributor.
If the tool is paired with the remote it will not connect with the app.

OLED Screen

This tool has an OLED screen that displays information about the tool.
Turn on the screen by inserting the battery and clicking the trigger.
In the handheld profile, cycle through the various displays using the left and right buttons on either side of the 

screen. (see Figure 1) The screens will not cycle if the remote is paired with the tool.
The screen will also display error codes in the event of abnormal operation. See Troubleshooting section error code 

table.

Display

OLED Screen

Information Shown

0

1

PSI
PSI

P
P

Bluetooth

®

 status, battery charge, current pressure, max. pressure. Press and hold both buttons to 

change units, select with right button, and confirm by jogging the tool.

2

INFO

123456AB001

FW:

2.0

Firmware version, serial number

3

Profile Mode Select screen to choose between Remote and Handhels profile operations

4

Cycles and days until next service.

5

TOTAL:

T=

Q=

n=

0.0h

0.0Ah

0

Elapsed operating hours (T), Ah used (Q), and number of cycles (n) since date of manufacture.

Figure 1 - OLED Operation Screens

CURRENT USER : 1

SINGLE CLICK

MRS+

# ODS # DAYS

i—Press is a registered trademark of Gustav Klauke GmbH
App Store is a registered trademark of Apple Inc.
Google Play is a registered trademark of GOOGLE INC.

Summary of Contents for ESG65LXR



















Reviews: