67
EN
TROUBLESHOOTING
The table includes some of the most common problems, their causes and remedies.
Cylinder
compression is
normal
The spark
plug is
fine
POSSIBLE CAUSE
SOLUTION
Yes
Yes
No fuel in the tank
Refuel
The fuel filter is dirty.
Clean the filter
There's water in the fuel
Replace it
The gasoline used is not the right one
Change fuel to one with an appropriate
octane rating
The carburetor's dirty.
Send your machine to technical service
Yes
No
Throttle lever on STOP
Put the throttle lever on acceleration.
The spark plug is dirty
Clean spark plug
Spark plug pipe not properly connected
Connect it
Lack of
compression
Yes
Spark plug is loose
Squeeze it.
Piston and piston rings are worn.
Send your machine to technical service
Engine does
not rotate
Cylinder is grated
Send your machine to technical service
Engine seizure
Send your machine to technical service
If the engine does not work properly (lack of power, unstable idling, etc.) here is a series of symptoms, their probable
causes and solution:
PROBLEM
POSSIBLE CAUSE
SOLUTION
The machine stops
Worn segments
Send your machine to technical service
Used piston
Send your machine to technical service
Crankshaft clearance
Send your machine to technical service
Clutch clearance
Send your machine to technical service
The engine gets too hot
Uninterrupted overuse
Pause every 10 minutes of work and let
the engine cool down.
Dirty exhaust pipe
Send your machine to technical service
The fuel is not adequate
Replace fuel
The engine’s not going
well.
Dirty carburetor
Send your machine to technical service
Dirty air filter
Cleaning the filter
Dirty fuel filter
Cleaning the filter
The engine stops or
can’t withstand idling
Carburetor badly regulated
Send your machine to technical service
Summary of Contents for EBW700
Page 2: ......
Page 88: ...www greencut es Manual revisado en noviembre de 2018...