Issue 9 February 2006
29
STOP
Important safety notes summary
Always
remember the Do’s and Don’ts (Sections 1.2 and 1.3)
Always
make sure that all the machine labels are in place, intact
and readable.
Always
apply handbrake and remove ignition key when leaving
the vehicle.
Always
make sure the cab safety catch is secured before driving
the machine.
Always
be aware of the machine gauges and beacons
Never
work under the hopper without the safety stay being on
(remember to remove the safety stay before lowering the hopper)
Always
carry out a full operator check at the beginning of each
shift (see section 3 and check list in the annex)
Always
carry out a full wash down procedure at the end of each
shift (see section 5 and check list in the annex)
No welding repairs
should be carried out on the machine without
disconnecting electronic components (see section 9).
If in doubt
use the faultfinding guide in section 6.
Always
report any defects.
