Issue 9 February 2006
36
2.
Power ON/OFF switch,
▲
+,
▼
–, CONTROL BUTTON
These control buttons are used to scroll up and down to select menu options.
3. “MENU”
Button
If you press the “MENU” button, the following list of options will be shown on the monitor.
PICTURE
SYSTEM
OPTION
CLOCK
The menu list will disappear if no selection is chosen within 2 seconds.
4. SEL.
SELECT CONTROL BUTTON
Use these buttons in order to select the option.
5. Camera
selector
button.
Enables selection of CA1 and CA2.
The OSD indicates which camera is currently operating.
6. REMOTE-CONTROL
SENSOR
The monitor can be operated via remote control. If using remote control, ensure that the IR on the remote
is facing the monitor.
How to select your monitor requirements
1. PICTURE
CONTROL
i.
Press the “MENU” button.
ii. Select
“PICTURE”.
iii.
Move the cursor to the “CONTRAST, BRIGHT, COLOUR, SHARP AND TINTS” with the SEL button.
iv. Press
the
“
▲
+ or
▼
–“ button.
v.
Select one of the five options.
vi.
Press the “MENU” button.
2. SYSTEM
CONTROL
i.
Press the “MENU” button.
ii. Select
“SYSTEM”.
iii.
Move the cursor to the “INPUT, COLOUR SYSTEM, BLUE BLACK, LANGUAGE” with the SEL
button.
iv. Press
the
“
▲
+ or
▼
–“ button.
v.
Select one of the five options.
vi.
Press the “MENU” button.
3. OPTION
CONTROL
i.
Press the “MENU” button.
ii. Select
“SEL”.
iii.
Move the cursor to the “HORIZONTAL, VERTICAL” with the SEL button.
iv. Press
the
“
▲
+ or
▼
–“ button.
v.
Select one of the two options.
vi.
Press the “MENU” button.
4. CLOCK
CONTROL
i.
Press the “MENU” button.
ii. Select
“CLOCK”.
iii.
Move the cursor to the “TIME, ON TIME, OFF TIME, ATTENTION, CH-TIME” with the SEL button.
iv. Press
the
“
▲
+ or
▼
–“ button.
v.
Select one of the five options.
vi.
Press the “MENU” button.
