Issue 9 February 2006
21
e. Remove all remaining debris/trash from the inside of the hopper, using the scraper provided (inside the
right hand access door).
f. Press the hopper switch (down) until the hopper is in its normal position.
g. For manual tilt of the hopper see Section 9.
In order to access the engine or the fan casing
When tilting the hopper to access the engine area,
do not unlock the two over centre catches
. Always
make sure the
hopper safety stay
is in place before leaning into the engine bay.
Put the safety stay in position as show on the pictures.
STOP
Always remember to remove and re-stow the safety stay prior to lowering the hopper.
STOP
Before tilting the hopper ensure that the machine is on level ground.
