Issue 9 February 2006
2
1.2.1 Operator Check List for the 525 Green Machine
Detailed operator checks procedure is described in section 3
Detailed machine wash down procedure is described in section 5.
Daily Action
Maintenance Procedure
Before
Shift Start
After Shift
Finish
End of
Week
Action
Tilt the hopper, applying the safety stay.
Switch engine off and
remove the ignition key.
Check hydraulic oil level – top up if required.
Check engine oil level – top up if required.
Check water tank is full.
Check diesel tank is full.
Check engine coolant header tank – top up as required.
Check window washer bottle is full.
Check engine Filter Minder is set to GREEN.
Check
ALL
vehicle lights, beacon and audible warning devices.
Check brush wear – replace as required.
Check nozzle height and side skids.
Check tyre pressure and condition.
Check all safety devices.
Check all machine functions prior to leaving depot.
Check all panels are in place and secure and the wander hose
is correctly located.
Wash vehicle including
ALL
hopper screens and cyclones.
Avoid directing high-pressure water at electrical components &
connections.
Clean radiator mesh screen and check radiator is clear. If
required wash radiator carefully with a low-pressure jet.
Clean dust suppression water filter during machine wash down.
Carry out a general inspection of the machine wiring, flexible
hoses and piping for security and integrity.
Carry out inspection of hopper door and hopper inlet.
Report any defects as soon as they are found.
Note Defects……………………………………………………………………………………………………………….
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
STOP
NEVER wash down the engine with the engine running, as it may ingest water causing
major engine damage.
