Issue 9 February 2006
44
DEA Preparations
1. Insert DEA plastic sack into container.
2. Replace
container.
3. Ensure water tank has sufficient water.
4. Add neat Acto-Bac to water tank, in the ration of 1:50 (3 litres for a full water tank).
Using the DEA
1. Position the machine just to the right and rearward of object
to be removed.
2.
Set the machine to Sweep Mode with the
Forward/Neutral/Reverse switch in Neutral.
3. Switch on the DEA unit by operating the switch located on
the header console.
4. Turn off brush sprays via brush spray control.
5. Remove lance and hose from stowage on the left hand side
of the machine.
6. Open water valve on lance, lightly spray the fouling with
Water/Acto-Bac mixture then shut off water valve.
7. Place hose end cuff over excrement and draw hose toward
you. Continue until all excrement is removed.
8. Stow the suction hose.
9. Switch off the DEA by operating the switch.
10. Now you can continue normal sweeping.
The same procedure applies for de-fouling grassed areas.
1. The DEA will only operate with Forward/Neutral/Reverse switch in the Neutral
position.
2. The DEA should only be used for lifting Dog Fouling, Vomit or Liquid Fouling.
(Anti-Social Deposits).
3.
The DEA should never be used as a general suction hose.
1. Always wear hand protection when using the DEA unit.
2. Always make sure that the water tank is treated with Acto-Bac.
3.
Always carry an additional supply of Acto-Bac
STOP
STOP
