Issue 9 February 2006
18
2.4.3 Setting the brush height
In order to sweep correctly, the brush height needs to be set correctly. You do not need to set the brush
height each time you engage Sweep mode, but remember the brushes require adjusting as they wear.
The metal knob located on the left hand side of your seat adjusts the
brushes height.
Unlock the locking ring under the knob, adjust, and re-tighten the
locking ring.
Use the following drawings to check the brush height.
2.4.4 Moving the brushes sideways
There are two small joysticks on the control arm. Each of them
controls one brush. You may use this feature when driving next to a
wall to clean as close of the wall as needed. The swept track can
vary from 1200mm (47.2 in) to 1800mm (70.9 in).
The widest swept track available is sometimes too wide for the
sweeping conditions. If debris/trash tends to be left on the sides of
the sweep path, try narrowing the swept path. (Also see section 6 -
Faultfinding)
Correct brush height
Incorrect brush height
(brushes are too low)
