Gree U-MATCH IV SERIES, Service Manual

Page: 23 / 164

20
U-Match Series DC
Inverter Service Manual
DPOUSPM
2 WIRELESS REMOTE CONTROLLER
2.1 Operation and Display View
ONOFF
HOUR
Table 2-2-1 Operation instruction of wireless remote controller
No. Name Function Description
Signal
transmitter
z
Signal transmitter
ON/OFF
button
z Press this button and the unit will be turned on; press it once more, and the unit will be turned off. When turning
off the unit, the Sleep function will be canceled, but the presetting time is still remained.
MODE
button
z
By pressing this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode is default after
power on. Under the Auto mode, the setting temperature will not be displayed; Under the Heat mode, the initial
value is 28°C (82°F);Under other modes, the initial value is 25°C(77°F).
AUTO; COOL; DRY; FAN; HEAT (only for cooling and heating unit)
- button
z Preset temperature can be decreased by pressing this button. Pressing and holding this button for more than 2
seconds can make the temperature changed quickly until release this button and then transmit this order. The
temperature adjustment is unavailable under the Auto mode, but the order can be sent by pressing this button.
Centigrade setting range: 16-30; Fahrenheit scale setting range 61-86.
+ button
z Preset temperature can be increased by pressing this button. Pressing and holding this button for more than 2
seconds can make the temperature changed quickly until release the button and then transmit this order. The
temperature adjustment is unavailable under the Auto mode, but the order can be sent by pressing this button.
Centigrade setting range: 16-30; Fahrenheit scale setting range 61-86.
FAN
button
z By pressing this button, Auto, Low, Middle, High speed can be circularly selected. After power on, Auto fan
speed is default.
Ɣ
AUTO
Low speed
Middle speed
High speed
Note: Under the DRY mode, the fan will be kept running at the low speed and the fan speed isn't adjustable.