Gree GMV-100WL/A-T, Service Manual, Page: 141 / 173

GREE DC Inverter Multi VRF System II Service Manual
137
Removal operation of gas liquid separator
Remark: Before removing the gas liquid separator, please make sure that there’s no refrigerant inside the pipeline of
system and disconnect the power
Process Photo Operation Instruction
2. Replace gas
liquid separator
● Loose 4 screws with
screwdriver
● Replace gas lliqu id
separator
3. Replace gas
liquid separator
● Weld the pipe
connected with gas
liquid separator
● Fix the screws at
the base of gas liquid
separator well again
Note: During welding
process, do not let
flame burn out other
parts
Removal operation for plate heat exchanger
Remark: Before removing the plate heat exchanger, please make sure that there’s no refrigerant inside the pipeline of
system and disconnect the power
Process Photo Operation Instruction
1. Remove top
cover, back
plate and right
plate
● Twist off the nuts
fixing the plate,
remove front plate
firstly, then remove
right plate, and
remove back plate
finally