Gree GMV-100WL/A-T, Service Manual, Page: 124 / 173

GREE DC Inverter Multi VRF System II Service Manual
120
Removal operation of compressor
Remark: Before removing the compressor, please make sure that there’s no refrigerant inside the pipeline and the power
is disconnected.
Process Photo Operation Instruction
1. Remove wiring
cover of
compressor
● Loose screws fiixng
the compressor with
screwdriver
● Then pull out the
power cord
Note: When removing
the power cord, make
marks for different
color power cords and
corresponding wiring
terminals for wrong
terminal.
2. Disconnect
compressor and
connected pipeline
● Weld suction pipe
and discharge pipe of
compressor
● then pull out the
connection pipe from
the compressor
Note: During welding
process, do not let the
flame burn out other
parts.
3. Loose nuts fixing
the foot of
compressor
Twist off the nuts for
compressor with
wrench
4. Remove the
compressor
from the chassis
● Take out the
compressor and
replace it
Note: When replacing
the compressor, do
not damage nearby
pipelines and other
parts