11-17
ENGINE
TIMING TOOTHED-BELT WHEEL
TOOTHED-BELT WHEEL
(1)
Fixup balancing shaft toothed-belt wheel with the tools as
shown in the figure.
(2)
Tighten the bolt to the specified torque.
MOUNTING OF TIMING TOOTHED-BELT B
(1)
Align the marks of crankshaft toothed-belt wheel B and
balancing toothed-belt wheel separately.
(2)
Mount timing toothed-belt onto the crankshaft toothed-belt
wheel B and balancing shaft toothed-belt wheel. The
tensioning side should remain tightened.
(3)
Ensure that the centers of tensioner wheel and the bolt are as
shown in the figure.
(4)
While applying force to the tensioner side of timing toothed-
belt with your finger, move tensioner B in the direction of the
arrow. At this moment, screw up the bolt to fixup tensioner
B. Don
t let the shaft rotate together with toothed-belt
wheel thus while screwing up the bolt, otherwise the toothed-
belt will be too tight.
(5)
Confirm to align the mark on the toothed-belt with the mark
on the front cover
(6)
Press down the central part of the tensioner side of timing
toothed-belt B with your forefinger. The toothed-belt is to be
pressed down by 5~7mm.
D
C
MD998785
6EN0636
timing
mark
front cover
timing mark
DEN0602
6EN0571
tensioner B
tensioner
center
bolt center
6EN0572
timing
mark
displacement being
pressed down
6EN0573
timing
mark