11-59
ENGINE
AC GENERATOR
wear limit line wite
9EN0192
9EN0193
9EN0194
6EN1706
steel wirt
6EN1705
rear cap
brush
steel wirt
BRUSH
(1)
If the brush is worn out to the wear limit line, replace brush by
taking the following steps:
(2)
The brush may be taken off by burning off the soldering joint of
the brush lead-wire.
(3)
While mounting new brush, you should burn on the brush lead-
wire with the brush being pressed into the brush holder.
NOTES FOR ASSEMBLY
MOUNTING OF ROTOR
(1)
Before mounting the rotor onto the rear cap, insert a steel wire
into the small hole on the rear cap to lift the mounted rotor, and
then pull out the steel wire.
A
