GREAT PLAINS Yield-Pro YP4025A-48TR20, Operator'S Manual

Page: 35 / 190

YP4025A-48TR20 Table of Contents Index Operating Instructions 31
2019-03-19 Table of Contents Index 411-198M
Folding the Implement Name
Fold the YP4025A-48TR20 product for moves between
fields and over public roads, and for storage. The
distance between the tractor and the seed structure
increases by 12 feet (3.7 m) during folding. Product,
tractor, or both will move during this operation.
Pinch Point and Crushing Hazard.:
To prevent serious injury or death:

Fold only on hard level ground. Allow ample room.
 If it is desired that the tractor not move during folding,
make sure tractor is in Park and/or has parking brakes
set, otherwise the telescoping movement of the product is
likely to result in tractor movement.
 Do not allow anyone to be on or near the product during
folding.

Stay clear of the wing sweep arcs. The sweep arcs of the
wings have numerous pinch and crush points in the
mechanism. Coulters and row openers are sharp.

Allow no one behind the product. The seed structure
moves backward during folding.
 Do not fold with product lowered, or machine damage will
result.

Fold only with markers resting in transport cradles.

Fold only if hydraulics are bled free of air and fully
charged with hydraulic oil.
1. Move to level ground.
Refer to Figure 27
2. On the cab Clutch Folding Module (CFM), set the
following switches to OFF (down):
MASTER switch in the CLUTCH cluster , and
Fert.Pump .
3. Raise product mainframe (see “ Raising/Lowering
Product ” on page 28). Do not raise (hydraulic) hitch
at this point.
4. Install lift cylinder locks (see “ Lift Cylinder Lock-Up ”
on page 30).
Figure 27
CFM: Wing Folding
26033
2
1
3
4
1 2
3