GREAT PLAINS Yield-Pro YP4025A-48TR20, Operator'S Manual

Page: 20 / 190

2019-03-19 Table of Contents Index 411-198M
YP4025A-48TR20 Table of Contents Index 16
Preparation and Setup
This section helps you prepare your tractor and
YP4025A-48TR20 Product for use, and covers tasks that
need to be done seasonally, or when the tractor/product
configuration changes.
Before using the product in the field, you must hitch it to
a suitable tractor, inspect systems and level the product.
Before using the product for the first time, and
periodically thereafter, certain adjustments and
calibrations are required.
Initial Setup
See “ Appendix B - Initial Setup ” on page 165 for
pre-delivery items (normally completed by dealer), and
first-time/infrequent setup tasks, including:
•
Install seed monitor console in tractor (page 166).
Post-Delivery/Seasonal Setup
On initial delivery, use with a new tractor, and seasonally,
check and as necessary, complete these items before
continuing to the routine setup items:
•
Bleed hydraulic system (page 115).
•
Wing leveling and alignment (page 118).
•
Radar calibration (page 169).
•
De-grease exposed cylinder rods if so protected at
last storage.
Pre-Planting Setup
Complete this checklist before routine setup:
 Read and understand “ Important Safety
Information ” on page 1.
 Check that all working parts are moving freely, bolts
are tight, and cotter pins are spread.
 Check that all zerks are in place and lubricated. See
“ Lubrication ” on page 125.
 Check that all safety decals and reflectors are
correctly located and legible. Replace if damaged.
See “ Safety Decals ” on page 6.
 Inflate tires to pressure recommended and tighten
wheel bolts as specified. See “ Tire Information ” on
page 152.