![background image](http://html1.mh-extra.com/html/gravograph/ls900-edge/ls900-edge_operating-and-maintenance-manual_2258801047.webp)
47
M_LS900 Fibre - LS900 Edge_EN_C
Adaptable accessories
6.
Cutting out kit
Used to support the material to be cut at a distance from the surface of the engraving table to minimize the
area of contact with the surface. The cutting out kit comprises 4 removable plate(s), pins (supports) and end
stops. The plate to be cut out rests on the pins positioned in advance on 2, 3 or 4 of the removable plates
which are arranged on the engraving table according to the dimensions of the part. In all cases place 5 pins
(supports) at the location of ZRef (top left corner).
The cutting table redirects the exhaust air over and under the material to clear the engraving area of fumes.