24
M_LS900 Fibre - LS900 Edge_EN_C
Recommendations for installation
The machine is fitted with fans which cool the laser source and the electronics during operation. Check that the
temperature is indeed between 10 °C (50 °F) and 35 °C (95 °F).
This marking equipment is designed to function at a room temperature between 10 °C (50 °F) and 35 °C
(95 °F).
•
If the equipment is stored at a temperature inferior to 10 °C (50 °F) or superior to 40 °C (104 °F), leave it
24h at a temperature between 10 °C (50 °F) and 35 °C (95 °F) before start-up.
•
Ambient light is enough to light the equipment properly. The machine has a lighting system inside the work
area.
•
Arrange the work area so that the operator can quickly and easily access all the external parts of the
machine. Do not obstruct the movement of the moving parts of the machine.
Make sure the connector screws are properly tightened to prevent the cables from
becoming disconnected while the machine is switched on. This could cause permanent
damage to the circuit boards.
The power cable must always be easily accessible (power shut-off device).
Ventilator